FAAC S800 24v Hydraulic Double Underground Kit
A Hybrid Hydraulic 24v underground gate opener from FAAC.
In Stock
£2,473.00 ex VAT
£2967.60 inc VAT
KEY FEATURES AT A GLANCE
- Hybrid system utilising an energy efficient hydraulic pump with a 24v motor
- Intensive use for residential and commercial use
- Hydraulic manual release for the event of a power outage
- High level of programmability
- Easy to maintain
- Stylish covers on the foundation boxes are all that is visible – keep your gates aesthetics
- Integrated stops – no need for extra stops in the ground
- Not suitable for closed boarded electric wooden gates
The FAAC S800 CBAC is a powerful, 24v underground electric gates opener which is suitable for residential, multi-resident and commercial entrances with swing gates where the leaves are no wider than 2m a piece.
These are rated for a continuous cycle, meaning that they can be used intensively throughout the day.
HYBRID HYDRAULIC TECHNOLGY
This ‘hybrid’ operator combines the reliability of Hydraulic technology with the safety protection that the 24v systems provide such as stop and reverse on obstacle detection. With integrated stops, you have no need to install external stops which makes fitting easier.
The motors sit within foundation boxes which are buried under ground beneath the bottom corner, acting as the bottom hinge of your gate. This becomes the pivot point, driven by the motors. Once everything is installed and the cover placed over the box, this is all you will ever see of these quiet and inconspicuous gate openers.
SIMPLER INSTALLATION & SET UP
To make the set up and install simpler, it has an integrated magnetic encoder with bus ‘2Easy’ (non-polarized two wire connection) and lifting handles for manoeuvring the motors in and out of the underground boxes.
Integrated hard stops set the limits for the open and closed points without the need for additional ground stops to be built.
WHAT’S IN THE BOX
- 2x S800 CBAC Motors
- 2x Foundation boxes with covers
- 1x Pair of SAFEBEAM photocells
- 1x Manual release key
- 1x Receiver
- 2x XT2 2 Button remote control
- 1x E124 Control board
BRIEF TECH SPEC
- 2m Max per leaf
- 800kgs Max weight
- Intensive duty cycles
- 24v
- Hydraulic
- 8.2 degrees/second opening speed
- 600Nm max. torque
- 60W Absorbed power
- Hydraulic lock – installed
- S800 CBAC Rack & Pinion (Z16) version