Beninca BILL 30M 230V Single Electric Gate kit
Beninca BILL 30M 230V Single Electric Gate kit £270.00£270.50 ex VAT
Beninca Bob 3024E 24V Double Kit
Beninca Bob 3024E 24V Single Kit £347.50£388.50 ex VAT

Beninca BILL 50M 230V Single Electric Gate Kit

The BILL 50M is a high spec. 230V electro-mechanical arm actuator for gate leaves up to 5.0m in width.

With a duty cycle rate of 30% the actuator is ideal for larger gates which do not require intensive duty cycle rates.

Opening time is reduced to 16 seconds for safety reasons due to possible gate widths of up to 5.0m The Worm screw is protected by a stainless steel sleeve – ideal for locations which experience adverse weather.

In Stock

Sku:72/1b-1

£350.00£375.00 ex VAT

£420.00 inc VAT

Clear selection

Beninca BILL 50M 230v single electric gate opener kit.

 

Please note: BILL arms are ‘handed’ so please leave a note when you order as to which motor you need (see below). If you are unsure, just give us a call on 01282 677300.

Looking from the inside of your gate… Left side (SX) / Right side (DX)

 

ADVANCED CONTROL PANEL WITH LCD SCREEN
The advanced BRAINY control panel is programmable on an LCD screen, has a built in receiver, allows individual programming of each motor and inputs for safety edges and photocells.

BRAINY Control Panel

• Built-in LCD display
• Built-in 433.92 MHz 64 codes and 3 codes radio receiver (programmable code, rolling code, ARC)
• Removable terminal blocks
• Encoder input for obstruction detection
• Separate limit switch inputs for each motor
• Open, close and pedestrian inputs
• Open-close and close photocell inputs
• N.C. or 8K2 safety edge input
• Output for 230 Vac and 12 Vac/dc electric lock
• Gate open indicator light output, service light, second radio channel and test photocells
• Autoset operating parameters with encoder equipped motors
• Electronic adjustment of individual couple for each motor and working times
• Electronic decelerations
• Optional parameter configuration and remote control management using the Advantouch system
• Number of maneuvers
• Programming access password
• Maintenance reminder

 

WHAT’S IN THE BOX
1x BILL post mounted rams
2x TO.GO2WV remote controls
1x BRAINY control board with built in receiver
1x Pair of PUPILLA 180 photocells
1x AW 433.92 Mhz Long range aerial
1x Personalised manual release key

Weight 24 kg
Gate Usage

Voltage

Brand

Single or Double Kit

Suitable for Closed Boarded Gates

Warranty

Gate Automation Type

Max Leaf Width (Meters)

, , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

Gate Type

Swing Gates

Mechanical Type

Electromechanical

Max Leaf Weight (Kgs)

, ,

Back to Top