The Liftmaster SLY 524EV (24v) sliding electric gate kit is perfectly suited for iron gates weighing up to 500kg at 8m in length.

STRONG & DURABLE 24V SYSTEM

It is both a strong and compact mechanical gate opener with deep-set pinion drive which is suitable for residential and commercial use as well being suitable for closed boarded wooden gates in wind affected areas under certain conditions.

Being a 24v system it has the advantage of stop and reverse obstacle detection for added safety. It features automatic force and limit adjustment, is simple to install and programme and is enabled for pedestrian mode (partial opening).

The advanced control board also has a connection for a battery back-up meaning that you could chose to install a fall back option in the event of an electric outage.

This quiet system is built to last and runs using a steel toothed rack (sold separately in 1 & 2 metre sections) either bolted or welded to the underside of the gate that meshes with the pinion on the motor. When the pinion rotates the gate is either opened or closed.

FOR TRADITIONAL SLIDING & CANTILEVER GATES

It can be installed on to a traditional sliding gate on a track or to a cantilever sliding gate. For an easy installation the kit is supplied with magnetic limit switches that can be moved along the toothed rack to set the open and closed position of the gate.

The 772E photocells are really simple to install. The lens rotation of 180 degrees means that lining up the beams is a breeze compared to other standard photocells.

Power failure causes no problems with this electric sliding gate kit comes with a manual release key so that you can open your gates manually if required.