Beninca TOM 3024E with Encoder Single Swing Gate Kit for Intensive use – TOM3024E 24v is a reliable and innovative gear motor, thanks to the 2 adjustable mechanical stops in opening and closing accessible from above and positioned under the metal cover of the shaft. The encoder device ensures crush prevention and precision in the gate moving phases. The 45-degree angle of the wiring cable minimises the distance from the ground. Aligning the rear and front brackets on the same axis enhances load distribution, thus optimising the actuator’s lifespan. The worm screw protected by a wiper ring and stainless steel shaft is suitable for environments with dust, sand, or harsh weather conditions. 

KIT CONTAINS:

• 1 x TOM3024E
• 1 x Trust24 Control Board
• 1 x Pupilla.T Photocells
• 1 x Lampy (Flashing Light)
• 2 x TO.GO2VA Remote Control

Key Features:

• Irreversible 24 Vdc electromechanical gear motor for intensive use equipped with encoder
• The encoder guarantees maximum safety and precision while the gate is moving
• Amperometric sensor obstacle detection system to prevent crushing
• Possibility of battery operation

Max Weight Per Leaf Size

• 2.0m – 500kg
• 2.5m – 400kg
• 3m – 300kg

Technical Data

• Motor Supply – 24 Vdc
• Max Absorbed Current – 5.5 A
• Max Trust – 1500 N
• Opening time – 11″
• Duty Cycle – Intensive Use
• Max Stroke – 300 mm
• Protection Level – IP44
• Mechanical Stops – YES
• Limit Switches – NO
• Encoder – Yes
• Operating Temperature – -20°C/+50°C
• Leaf Max Dimension – 3m

• BRAINY Manual