The Beninca DU.350NV IS A 230v electro-mechanical underground motor with built in encoder, designed and built to compete with and surpass the performance of equivalent hydraulic operators.

The motors are self-locking and available in 2 versions – standard and fast speeds. Both versions incorporate the gearbox enclosed in an oil bath for superior lubrication and service life.

The units come complete with internal stops and the facility to fit limit switches.It is possible to install /change the motor without removing the gate.

This fast motor has an opening cycle speed of just 16 seconds which is perfect for properties on busy roads and are suitable for intensive usage.

The DU.350NV are irreversible electromechanical geared motors in oil which have included adjustable mechanical hard stops.

Electromechanical limit switches are available to go with this kit if required.

These are one of the few underground motors which we would recommend as being suitable for closed boarded gates. Although, we strongly advise you to call us prior to purchase on 01282 677300 so that we can make absolutely sure that these operators will be suitable for your particular install.

The DU.350NV can move a max gate leaf of 3.5m @ 500kgs.

INCLUDED IN THE KIT:

• 1x DU.350NV Motors
• 1x Foundation boxes
• 1x BRAINY230v Control panel
• 2x TO.GO2WV Remotes Controls
• 1x Pair of Pupilla Photocells
• 1x AW 433.92Mhz aerial

TECHNICAL SPECIFICATION:

• Power supply: 230 Vac (50-60Hz)
• Motor supply: 230 Vac
• Max absorbed current: 1.7 A
• Torque: 370 Nm
• Opening time: 16”
• Operation cycle: intensive use
• Protection level: IP67
• Encoder: No
• Operating temperature: -20°C /+50
• Leaf max dimension: 3.5 m
• Lubrication: OIL
• Weight: 20.3 kg

• Beninca DU350N/DU350NV/DU350NVE/DU350NGE
• BRAINY Manual