Beninca BILL 50M 230v single electric gate opener kit.

Please note: BILL arms are ‘handed’ so please leave a note when you order as to which motor you need (see below). If you are unsure, just give us a call on 01282 677300.

Looking from the inside of your gate… Left side (SX) / Right side (DX)

ADVANCED CONTROL PANEL WITH LCD SCREEN
The advanced BRAINY control panel is programmable on an LCD screen, has a built in receiver, allows individual programming of each motor and inputs for safety edges and photocells.

BRAINY Control Panel

• Built-in LCD display
• Built-in 433.92 MHz 64 codes and 3 codes radio receiver (programmable code, rolling code, ARC)
• Removable terminal blocks
• Encoder input for obstruction detection
• Separate limit switch inputs for each motor
• Open, close and pedestrian inputs
• Open-close and close photocell inputs
• N.C. or 8K2 safety edge input
• Output for 230 Vac and 12 Vac/dc electric lock
• Gate open indicator light output, service light, second radio channel and test photocells
• Autoset operating parameters with encoder equipped motors
• Electronic adjustment of individual couple for each motor and working times
• Electronic decelerations
• Optional parameter configuration and remote control management using the Advantouch system
• Number of maneuvers
• Programming access password
• Maintenance reminder

WHAT’S IN THE BOX
1x BILL post mounted rams
2x TO.GO2VA remote controls
1x BRAINY control board with built in receiver
1x Pair of PUPILLA 180 photocells
1x AW 433.92 Mhz Long range aerial
1x Personalised manual release key

• BILL50M_tech
• BRAINY Manual