ELECTRIC SWING GATE OPENERS

GATE MOUNTED RAM ARMS

These handy motors mount to the back side of your gate. Coming in both electromechanical & hydraulic options, we have an above ground motor for any type of gate.

Beninca BILL 30M 230V Double kit

£445.00 ex. VAT

Beninca Bob 3024E 24V Double Kit

£625.00 ex. VAT

LiftMaster SCS 300 230V Electric Double Gate Kit

£440.00 ex. VAT

UNDERGROUND GATE OPENERS

Quiet and discreet, these underground gate motors act as the bottom hinge of your gate. These gate openers are practical and attractive, with options to suit any gate type.

BFT Eli 250 BT 24V Double Underground Kit

£926.00 ex. VAT

Beninca DU.IT14NE 230V Double Kit

£860.00 ex. VAT

LiftMaster SUB 300 Double Electric Underground Gate Kit

£575.00 ex. VAT

ARTICULATED GATE OPENERS

When it is not possible to fit an underground motor or attach ram arms to the gate then articulated arms may be suitable. These can only be used on open pattern, iron gates.

BFT Virgo 24V Double Articulated Arm Kit

£629.00 ex. VAT

LiftMaster ART 300 – 230V Electric Double Arm Kit

£515.00 ex. VAT

FAAC 391 24V Double Arm Kit

£662.00 ex. VAT

SLIDING & CANTILEVER GATE OPENERS

SLIDING & CANTILEVER GATE MOTORS

Both of these types of gate use the same motors to drive them. It is just the hardware that differs.

Beninca BULL 624ESA Sliding Gate Kit

£450.00 ex. VAT

LiftMaster SLY 500k 230v Electric Sliding Gate Opener

£365.00 ex. VAT

FAAC C720 Electric Sliding Gate Kit

£383.00 ex. VAT

SLIDING GATE HARDWARE

High quality and robust sliding gate hardware from Hi Motions.

100mm Diameter V-Groove Wheel with Mounting Bracket

£18.00 ex. VAT

1m Length – Heavy Duty Steel Toothed Racking

£15.99 ex. VAT

40mm Diameter x 45mm Nylon Roller (x1)

£4.99 ex. VAT

CANTILEVER GATE HARDWARE

Hi Motions provide the best quality cantilever gate hardware.

Small Cantilever Gate Guide Wheel

£19.99 ex. VAT

Small Cantilever Gate Carriage

£63.00 ex. VAT

3m Small Cantilever Gate Track

£48.00 ex. VAT

SAFETY EDGES & CONTROLLERS

THROUGH EDGES

END EDGES

CONTROLLERS & RECEIVERS

Gate safety should be your primary focus when automating electric gates.
We have put together a brief guide to show you the basics of the use of safety devices, however, we always recommend you get a qualified Gate Safe or DHF gate installer to carry out a risk assessment on site, prior to installation of any equipment.

Back to Top